找商网手机端:m.zhaosw.com
深圳市龙岗区平湖泰利信电子经营部
主营产品: 网络分析仪
㜉㜆㜊㜇㜊㜋㜆㜆㜇㜌㜅
TEC温度控制器-深圳温度控制器出售
价格
订货量(台)
¥18000.00
≥1
店铺主推品 热销潜力款
联系人 李万来
㜉㜆㜊㜇㜊㜋㜆㜆㜇㜌㜅
发货地 广东省深圳市
在线客服
商品参数
|
商品介绍
|
联系方式
品牌 NEWPORT
名称 TEC控制器
型号 NEWPORT 9016
电压 220V
显示 LCD
用途 光通信测试
应用 半导体测试
产地 美国
服务方式 租赁、出售
是否提供维修 是
是否定制 否
是否回收 是
兼容 NEWPORT9008
新旧 8成新
商品介绍
LDT-5900 系列大功率热电温度控制器具有的精度,并实现了对激光二管和光纤组件的大功率温度控制。控制器将完全可调的 PID 控制回路与数字 PWM 输出电流相结合,确保在 -50°C 到 +250°C 的范围间实现迅速、和的温度控制。LDT-5900 系列支持热敏电阻、IC 和铂电阻 (RTD) 传感器(可从前面板或通过 GPIB 接口进行选择),可在系统设计和测试的过程中实现程度的灵活性。
具有 60W 或 120W 输出的热电温度控制器
±0.001°C 的设定点分辨率以及 0.005°C 的长期稳定性
完全编程 PID 控制回路
用于立系统调谐的自动调谐模式
GPIB/IEEE488 和 RS-232 接口
四线电压和传感器测量
The Newport 5600 High Power Laser Diode Drivers feature advanced circuit designs and careful layout of laser diode drivers to provide you with an extremely low noise, highly stable output current. External analog modulation input allows precision control of the laser output for a variety of applications including power level control and wavelength tuning. A monitor photodiode is reversed biased at 5 Volts. All laser diode parameters are accessible with 16-bit resolution including the laser diode's forward voltage for full characterization.
Time tested laser diode protection safety features are incorporated into the 5600 Series Laser Diode Drivers. Input power module filters provide first stage protection against transients. Additional filtering and power regulation stages coupled with high speed transient detection circuits let you operate your laser diode worry-free from transients. A slow turn-on sequence, multiple output shorting circuits, and an independent current limiting feature provide the superior protection you demand from all your laser diode instrumentation.
8375
• TEC Output Power: 60 W
• TEC Output Current: 7.5 A
Features:
Complete System Controller for 8 or 16 Channel Applications
EDFA Pumping or DWDM Signal Sources
Outputs Configured for Either Floating or Common Anode Type LD Package Styles
IEEE-488 (GPIB) and RS-232C Interfaces
The Models 8008, 8016, 9008 and 9016 Modular Controllers expand on Newport's modular laser diode controller concept to meet the higher channel densities found in Dense WDM (DWDM) applications and 2-D VCSEL arrays where all the lasers have similar electrical configurations. The eight or sixteen bays accept an array of LDD, TEC, and LDD/TEC combo modules.
The mainframe automatically detects which module is installed in each bay and displays the system configuration on a large LCD screen. A sophisticated processor provides enhanced system control and data collection capabilities.
GPIB/IEEE-488 and RS-232C interfaces are included with the High-Density Laser Diode Controller Models for complete remote control and data collection.
Modules 8605.16C and 8610.16C:
The 8600C Series Combo LDD/TEC modules are designed for use in communication applications and have an internal function generator for testing systems. The user only needs to program the frequency, Imax, and Imin to modulate the laser diode output. Triangle, sine or square (50% duty cycle) waveforms are available from 200 Hz-300 kHz. This range of frequencies meets today's low frequency single-tone and high data rate test requirements for datacom and telecom.
Module 8350:
A 40 Watt Temperature Controller Module, the Model 8350, can meet your most demanding TE cooling needs. Complete characterization of ITE, VTE and the sensor input is possible, making the 8350 module ideal for complete characterization of telecom laser diodes.
The 5305 offers excellent short-term and long-term stability. At less than 0.004°C stability over one hour, and 0.01°C over 24 hours, the 5305 provides an excellent solution for precision temperature control.
Fully Adjustable PID
The 5305 comes with eight factory set gain settings for the temperature control loop, which are sufficient for most applications, but also offers fully adjustable PID settings, allowing you to fine-tune the response of the instrument. Also, because the loop is digital and uses the temperature (not sensor resistance) as the control variable, variations in sensor sensitivity across temperature (primarily seen with thermistors) does not affect the unit as it does with analog-based PID loops.
Integrated Fan Supply
The 5305 includes an adjustable 4.5V to 12VDC power supply for power external fans, such as those on our 240 and 260 Series LaserMounts. By incorporating the power supply, it eliminates the need for an external power supply and simplifies cabling to the mount. If you will be using this power supply, make sure you choose
AutoTune automatic PID
60W of TEC power
0.004°C stability
Bi-polar output: heat & cool
Thermistor, RTD, LM335, & AD590 sensors
4-wire RTD mode
具有 60W 或 120W 输出的热电温度控制器
±0.001°C 的设定点分辨率以及 0.005°C 的长期稳定性
完全编程 PID 控制回路
用于立系统调谐的自动调谐模式
GPIB/IEEE488 和 RS-232 接口
四线电压和传感器测量
The Newport 5600 High Power Laser Diode Drivers feature advanced circuit designs and careful layout of laser diode drivers to provide you with an extremely low noise, highly stable output current. External analog modulation input allows precision control of the laser output for a variety of applications including power level control and wavelength tuning. A monitor photodiode is reversed biased at 5 Volts. All laser diode parameters are accessible with 16-bit resolution including the laser diode's forward voltage for full characterization.
Time tested laser diode protection safety features are incorporated into the 5600 Series Laser Diode Drivers. Input power module filters provide first stage protection against transients. Additional filtering and power regulation stages coupled with high speed transient detection circuits let you operate your laser diode worry-free from transients. A slow turn-on sequence, multiple output shorting circuits, and an independent current limiting feature provide the superior protection you demand from all your laser diode instrumentation.
8375
• TEC Output Power: 60 W
• TEC Output Current: 7.5 A
Features:
Complete System Controller for 8 or 16 Channel Applications
EDFA Pumping or DWDM Signal Sources
Outputs Configured for Either Floating or Common Anode Type LD Package Styles
IEEE-488 (GPIB) and RS-232C Interfaces
The Models 8008, 8016, 9008 and 9016 Modular Controllers expand on Newport's modular laser diode controller concept to meet the higher channel densities found in Dense WDM (DWDM) applications and 2-D VCSEL arrays where all the lasers have similar electrical configurations. The eight or sixteen bays accept an array of LDD, TEC, and LDD/TEC combo modules.
The mainframe automatically detects which module is installed in each bay and displays the system configuration on a large LCD screen. A sophisticated processor provides enhanced system control and data collection capabilities.
GPIB/IEEE-488 and RS-232C interfaces are included with the High-Density Laser Diode Controller Models for complete remote control and data collection.
Modules 8605.16C and 8610.16C:
The 8600C Series Combo LDD/TEC modules are designed for use in communication applications and have an internal function generator for testing systems. The user only needs to program the frequency, Imax, and Imin to modulate the laser diode output. Triangle, sine or square (50% duty cycle) waveforms are available from 200 Hz-300 kHz. This range of frequencies meets today's low frequency single-tone and high data rate test requirements for datacom and telecom.
Module 8350:
A 40 Watt Temperature Controller Module, the Model 8350, can meet your most demanding TE cooling needs. Complete characterization of ITE, VTE and the sensor input is possible, making the 8350 module ideal for complete characterization of telecom laser diodes.
The 5305 offers excellent short-term and long-term stability. At less than 0.004°C stability over one hour, and 0.01°C over 24 hours, the 5305 provides an excellent solution for precision temperature control.
Fully Adjustable PID
The 5305 comes with eight factory set gain settings for the temperature control loop, which are sufficient for most applications, but also offers fully adjustable PID settings, allowing you to fine-tune the response of the instrument. Also, because the loop is digital and uses the temperature (not sensor resistance) as the control variable, variations in sensor sensitivity across temperature (primarily seen with thermistors) does not affect the unit as it does with analog-based PID loops.
Integrated Fan Supply
The 5305 includes an adjustable 4.5V to 12VDC power supply for power external fans, such as those on our 240 and 260 Series LaserMounts. By incorporating the power supply, it eliminates the need for an external power supply and simplifies cabling to the mount. If you will be using this power supply, make sure you choose
AutoTune automatic PID
60W of TEC power
0.004°C stability
Bi-polar output: heat & cool
Thermistor, RTD, LM335, & AD590 sensors
4-wire RTD mode
联系方式
公司名称 深圳市龙岗区平湖泰利信电子经营部
联系卖家 李万来 (QQ:674144714)
手机 㜉㜆㜊㜇㜊㜋㜆㜆㜇㜌㜅
地址 广东省深圳市